1. 回饋控制的原理
1.a. PID控制器與程序模式(Process Model)的關連性
1.b. 管線和儀表配置圖(Piping & Instrumentation Diagram，P&ID)
1.c. 調諧PID控制器參數的方法
2. 實作強化回饋控制效率的方法
2.a. 比較使用不同PID參數的單迴路控制效率
2.b. 串級控制 (Cascade Control)
2.c. 比例控制 (Ratio Control)
2.d. 凌駕控制 (Override Control)
2.e. 前餽控制 (Feedforward Control)
3. 蒸餾塔操作(實作苯純化塔)
3.a. 穩定操作 (Basic Process Control)
3.b. 品質控制 (Quality Control)
3.c. 相對增益陣列 (Relative Gain Array)1. The principle of return control
1.a. The correlation between PID controller and program mode (Process Model)
1.b. Piping & Instrumentation Diagram, P&ID
1.c. Methods to adjust PID controller parameters
2. Methods to strengthen the efficiency of rebate control
2.a. Comparison of single loop control efficiency using different PID parameters
2.b. Cascade Control
2.c. Ratio Control
2.d. Override Control
2.e. Feedforward Control
3. Distillation tower operation (acting benzene purification tower)
3.a. Basic Process Control
3.b. Quality Control
3.c. Relative Gain Array
由實用的本質來探討程序控制;並強調控制原理於實際工業製程之應用。
The application of program control is explored from the practical nature; and the application of control principles in the actual industrial process is emphasized.
Textbooks:
Principles and Practices of Automatic Process Control, 3rd Edition, Carlos A. Smith, Armando B. Corripio, 2006
References:
Process Dynamics and Control, 3rd Edition, Dale E. Seborg, Thomas F. Edgar, Duncan A. Mellichamp, Francis J. Doyle III, 2011
Textbooks:
Principles and Practices of Automatic Process Control, 3rd Edition, Carlos A. Smith, Armando B. Corripio, 2006
References:
Process Dynamics and Control, 3rd Edition, Dale E. Seborg, Thomas F. Edgar, Duncan A. Mellicham, Francis J. Doyle III, 2011
| 評分項目 Grading Method | 配分比例 Grading percentage | 說明 Description |
|---|---|---|
| 期中考期中考 Midterm exam |
10 | 10/5 (六) 09:00-11:00 |
| 期中考期中考 Midterm exam |
20 | 11/9 (六) 09:00-11:00 |
| 期中考期中考 Midterm exam |
25 | 12/7 (六) 09:00-11:00 |
| 期末考期末考 Final exam |
25 | 12/28 (六) 09:00-11:00 |
| 作業作業 Action |
20 | 共有四次作業，連續七個字一模一樣視為抄襲，抄襲與被抄襲的同學平分作業分數 |
