針對化學工程程序，探討其程序控制模型，並藉由操作計算軟體Simulink，建立質量、能量與氣液平衡，將課程上所學的內容應用於其中，給予適當的控制目標、控制元件以及控制器設定(PID control)。

<介紹訊號與系統之基本理論，奠定控制系統進階理論的基礎。>

For chemical engineering programs, explore their program control models, and use the calculation software Simulink to establish quality, energy and gas-fluid balance, apply the content learned in the course to give appropriate control targets, control components and controller settings (PID control).

由實用的本質來探討程序控制;並強調控制原理於實際工業製程之應用。

The application of program control is explored from the practical nature; and the application of control principles in the actual industrial process is emphasized.

1."Principles and practice of automatic process control", 3rd edition, C. A. Smith and A. Corripio,
John Wiley & Sons,NJ,2006.

2."Process Dynamics and Control",3rd ed, D. E. Seborg, T. F. Edgar, D. A. Mellichamp, F. J. Doyle III,
J. Wiley and Sons, NJ, 2011.

2."Process Dynamics and Control",3rd ed, D. R. Coughanowr, S. E. LeBlanc, McGraw-Hill, NJ, 2009.

3. 余兆棠/李志鵬編著, 信號與系統, 滄海書局, 2011年, 2版.

1. "Principles and practice of automatic process control", 3rd edition, C. A. Smith and A. Corripio,
John Wiley & Sons,NJ,2006.

2."Process Dynamics and Control",3rd ed, D. E. Seborg, T. F. Edgar, D. A. Mellicamp, F. J. Doyle III,
J. Wiley and Sons, NJ, 2011.

2."Process Dynamics and Control",3rd ed, D. R. Coughanowr, S. E. LeBlanc, McGraw-Hill, NJ, 2009.

3. Written by Yu Zhaotang/Li Zhiling, Signals and Systems, Huahai Books Bureau, 2011, 2nd edition.